سوابق علمی و پژوهشی (Publications)

مقالات چاپ شده در مجلات معتبر بین المللی

S. A. Hosseini, S. Akbarinia, D. Mohammadyani, and S. K. Sadrnezhaad, “Enhanced corrosion resistance of porous NiTi with plasma sprayed alumina coating,” Corros. Eng. Sci. Technol., 2015.
S. A. Hosseini, A. Kazemzadeh, and M. Alizadeh, “A Comparative Study on the Mechanical Behavior of Porous Titanium and NiTi Produced by a Space Holder Technique,” J. Mater. Eng. Perform., vol. 23, no. 3, pp. 799–808, 2014.
S. A. Hosseini, R. Yazdani-rad, A. Kazemzadeh, and M. Alizadeh, “Influence of Thermal Hydrogen Treatment of Titanium Particles on Powder Metallurgical Processing of NiTi-SMA,” Mater. Manuf. Process., vol. 28, no. November, pp. 37–41, 2013.
S. A. Hosseini, M. Alizadeh, A. Ghasemi, and M. a. Meshkot, “Highly Porous NiTi with Isotropic Pore Morphology Fabricated by Self-Propagated High-Temperature Synthesis,” J. Mater. Eng. Perform., vol. 22, pp. 405–409, Jul. 2013.
M. Meybodi, S. A. Hosseini, M. Rezaee, S. K. Sadrnezhaad, and D. Mohammadyani, “Ultrasonics Sonochemistry Synthesis of wide band gap nanocrystalline NiO powder via a sonochemical method,” Ultrason. – Sonochemistry, vol. 19, no. 4, pp. 841–845, 2012.
Mohseni Meybodi, S. A. Hosseini, M. Rezaee, S. K. Sadrnezhaad, and D. Mohammadyani, “Synthesis of wide band gap nanocrystalline NiO powder via a sonochemical method,” Ultrason. Sonochem., vol. 19, no. 4, pp. 841–845, 2012.
Ghasemi, A. Hosseini, and S. K. Sadrnezhaad, “Pore control in SMA NiTi scaffolds via space holder usage,” Mater. Sci. Eng. C, vol. 32, no. 5, pp. 1266–1270, 2012.
Mohammadyani, S. A. Hosseini, and S. K. Sadrnezhaad, “Characterization of Nickel Oxide Nanoparticles Synthesized via Rapid Microwave-Assisted Route,” Int. J. Mod. Phys. Conf. Ser., vol. 5, pp. 270–276, 2012.
S. A. Hosseini and M. Alizadeh, “Characterization and Catalytic Behaviour of Nanostructured Iron Oxide Powder from Waste Pickle Liquor of Steel Industry,” Int. J. ISSI, vol. 7, no. 1, pp. 21–24, 2010.
S. A. Hosseini, S. K. Sadrnezhaad, and a. Ekrami, “Phase transformation behavior of porous NiTi alloy fabricated by powder metallurgical method,” Mater. Sci. Eng. C, vol. 29, no. 7, pp. 2203–2207, Aug. 2009.
K. Sadrnezhaad and S. A. Hosseini, “Fabrication of porous NiTi-shape memory alloy objects by partially hydrided titanium powder for biomedical applications,” Mater. Des., vol. 30, no. 10, pp. 4483–4487, Dec. 2009.


مقالات منتشر شده در کنفرانس های بین المللی

Prospects of using powder metallurgy method to produce Nitinol shape memory dental implant, 3rd International Engineering Materials and Metallurgy, (iMat), Tehran, Iran, 2014.
Characterization of Ba1-xSrxTiO3 thin film by Ellipsometry method, 14th National Conference of Surface Engineering, Karaj, Iran, 2014 (In Persian).
Structural Relaxation and Phase Transformation of Nanostructered/Amorphous NiTi during Sintering, The First International and sixth Joint Conference of Iranian Metallurgical Engineering Society and Iranian Fundurymen’s Society, 2012.
Compressive behavior of high-porosity NiTi, The First International and sixth Joint Conference of Iranian Metallurgical Engineering Society and Iranian Fundurymen’s Society, 2012.
Improvement of SMA-NiTi Sintering by Thermally Treated of Titanium Powder under Hydrogen Atmosphere, International Conference on Materials Heat Treatment (ICMH 2012), Islamic Azad University, Majlesi Branch, May 30-31, 2012, Isfahan, Iran.
Phase Transformation Behaviour of Porous NiTi Alloys Produced by Space-holder Method, 2nd International Conference on Materials Heat Treatment (ICMH 2011), May 10-12, Isfahan, Iran.
behavior of nanostructure iron oxide for removal carbon monoxide from industrial stack emission gas, 14th Conference on Environment and Mineral Processing, VSB – Technical University of Ostrava, 3-5 June 2010.
Sonochemical Synthesis of Nickel Oxide Nano-particle, 3rd Conference on Nanostructures (NS2010), Kish Island, I.R. Iran, March 2010.
Effect of Alumina Coating on Corrosion Behaviour of Porous NiTi Parts, 16th Conference on Iranian Biomedical Engineers, Imam Khomeini Clinical Complex, Tehran, Iran, 29-30 September 2009. (In Persian)
Characterization of Nickel Oxide Nanoparticles Synthesized VIA rapid microwave-ASSISTED Route, 2nd International Conference on Ultrafine Grained and Nanostructured Materials Center of Excellence For High Performance, Materials School of Metallurgy and Materials Engineering University, College of Engineering, University of Tehran, Tehran, Iran. 14-15 November 2009.
Mechanical Behavior of Porous NiTi Fabricated by Powder Metallurgy Method for Biomedical applications, Second Iranian joined conference of metallurgist engineers and scientific committee of casting, Azad University, Karaj, Iran, November 2008. (In Persian)
Fabrication of NiTi-SMA parts by powder metallurgy for biomedical application, First Iranian joined conference of metallurgist engineers and scientific committee of casting, Zob-Ahan Co., Isfahan, Iran, October 2007. (In Persian)