Publication

Papers:

  1. Eskandari-Naddaf, H., & Kazemi, R. (2017). ANN prediction of cement mortar compressive strength, influence of cement strength class. Construction and Building Materials, 138, 1-11.
  2. Korouzhdeh, T., Eskandari-Naddaf, H., & Gharouni-Nik, M. (2017). An Improved Ant Colony Model for Cost Optimization of Composite Beams. Applied Artificial Intelligence, 31(1), 44-63.
  3. Madadi, A., Eskandari-Naddaf, H., & Gharouni-Nik, M. (2017). Lightweight Ferrocement Matrix Compressive Behavior: Experiments Versus Finite Element Analysis. Arabian Journal for Science and Engineering, 1-13.
  4. Lezgy-Nazargah, M., & Eskandari-Naddaf, H. (2017). Effective coupled thermo-electro-mechanical properties of piezoelectric structural fiber composites: A micromechanical approachJournal of Intelligent Material Systems and Structures, 1045389X17711787.
  5. Amin Ziaei-Nia, Gholam-Reza Tadayonfar, Hamid Eskandari-Naddaf (2017). “Dynamic Cost Optimization method for Mix Design of Concrete Curb ” ICMPC 2017 Materials Today: Proceedings (Accepted).
  6. Amin Ziaei-Nia, Gholam-Reza Tadayonfar, Hamid Eskandari-Naddaf (2017). “Effect Of Air Entraining Admixture On Concrete Under Temperature Changes In Freeze And Thaw Cycles (2017). “ICMPC 2017 Materials Today: Proceedings (Accepted).
  7. Hamid Eskandari, S. Muralidhara, B. K. Raghu Prasad, B.V. Venkatarama Reddy , Amir Pakzad (2017) .” Properties of SCC in Green and Grey State” ICMPC 2017, Materials Today: Proceedings (Accepted).
  8. Hamid Eskandari, Mehran Shariat, Morteza Tayebinia, Mohammad Sadeghian (2017) .” Finite Element Modeling of Shear Strength for Concrete Deep Beams (Part II)” ICMPC 2017, Materials Today: Proceedings (Accepted).
  9. Hamid Eskandari, Mehran Shariat, Morteza Tayebinia, Mohammad Sadeghian (2017) .”Sensitivity Analysis of Reinforced Concrete Deep Beam by STM and FEM (Part III)” ICMPC 2017, Materials Today: Proceedings (Accepted).
  10. Eskandari, H., & Korouzhdeh, T. (2016). Cost optimization and sensitivity analysis of composite beams. Civil Engineering Journal, 2(2), 52-62.
  11. Eskandari, H., & Tayyebinia, M. (2016). Effect of 32.5 and 42.5 cement grades on ann prediction of fibrocement compressive strength. Procedia Engineering, 150, 2193-2201.
  12. Eskandari-Naddaf, H., Lezgy-Nazargah, M., & Bakhshi, H. (2016). Optimal Methods for Retrofitting Corrosion-damaged Reinforced Concrete Columns. Procedia Computer Science, 101, 262-271.
  13. Eskandari, H., Nic, A. M., & Ghanei, A. (2016). Effect of Air Entraining Admixture on Corrosion of Reinforced Concrete. Procedia Engineering, 150, 2178-2184.
  14. Eskandari, H., Nik, M. G., & Eidi, M. M. (2016). Prediction of Mortar Compressive Strengths for Different Cement Grades in the Vicinity of Sodium Chloride Using ANN. Procedia Engineering, 150, 2185-2192.
  15. Eskandari-Naddaf, H., & Azimi-Pour, M. (2016). Performance evaluation of dry-pressed concrete curbs with variable cement grades by using Taguchi method. Ain Shams Engineering Journal.
  16. Eskandari, H., Nik, M. G., & Pakzad, A. (2016). Foundation analyzing of centrifugal ID fans in cement plants. Alexandria Engineering Journal.
  17. H Eskandari, A Pakzad. (2015). Applying Simplex Lattice In Optimizing Self-Compaction Concrete Compressive Strength. Asian Journal Of Civil Engineering (BHRC) 16 (6), 775-787.
  18. Eskandari, H., & Madadi, A. (2015). Investigation of ferrocement channels using experimental and finite element analysis. Engineering Science and Technology, an International Journal, 18(4), 769-775.
  19. H Eskandari, A Pakzad, M Tayebi Nia. (2015). Optimum Mix Design of Self Consolidating Concrete Modeling. Concrete Research (Persian) 2 (6), 25-38.
  20. E Hamid, P Amir. (2015). Proposed compressive strength model for high flow ability concrete. Cement Magazine (Persian).
  21. H Esakandari, M Azimi Pour, R Kazemi. (2015). Designing, Proposing and Comparing the Methods Predicting the Compressive Strength of the Ferro cement Mortar. Concrete Research Letter 6 (1), 1-10.
  22. GR Ebrahimi, A Momeni, E Hamid. (2014). Interaction between Precipitation and Dynamic Recrystallization in HSLA-100 Microalloyed Steel. Iranian Journal of Materials Forming 2 (1), 34-50.
  23. Eskandari, H., Muralidhara, S., Prasad, B. R., & Reddy, B. V. (2012). Fracture properties of Self Compacting Concrete for Notched and Un-notched Beams. Global Journal of Research In Engineering, 12(1-E).
  24. Muralidhara, S., Prasad, B. R., Eskandari, H., & Karihaloo, B. L. (2010). Fracture process zone size and true fracture energy of concrete using acoustic emission. Construction and Building Materials, 24(4), 479-486.
  25. Eskandari, H., Muralidhara, S., Raghuprasad, B. K., & Reddy, B. V. (2010). Size effect in self consolidating concrete beams with and without notches. Sadhana, 35(3), 303-317.
  26. Prasad, B. R., Eskandari, H., & Reddy, B. V. (2009). Prediction of compressive strength of SCC and HPC with high volume fly ash using ANN. Construction and Building Materials, 23(1), 117-128.

Conferences:

  1. H Eskandari, M. Shariat, M. Sadeghian. (2016). Optimization methods of rectangular concrete beams. 3th International Conference on Recent Innovations in Civil Engineering, Architecture & Urban Planning, Tehran, Iran.
  2. H Eskandari, E. S. Hosseini. (2015). Corrosion behavior of rebars in concrete containing micro-silica and air entraining using TOEFL test. 3th International Conference on Applied Research in Civil Engineering, Architecture & Urban Management, Tehran, Iran.
  3. H Eskandari, M. Tayebinia, M. Shariat. (2015). Analysis of shear strength and modeling of concrete deep beams. 3th International Conference on Applied Research in Civil Engineering, Architecture & Urban Management, Tehran, Iran.
  4. H Eskandari, S. Amiri Mendi. (2015). Investigation of freeze and thaw effects on compressive strength and wight of concrete. 3rd. International Congress on Civil Engineering, Architecture & Urban Development, Tehran, Iran.
  5. H Eskandari, M. Tayebinia, M. Sharifi. (2015). Effects of NaCl on cement with 325 strength grade. 3rd. International Congress on Civil Engineering, Architecture & Urban Development, Tehran, Iran.
  6. H Eskandari, M. Tayebinia, M. Shariat. (2015). Analysis of shear strength and modeling of concrete deep beams. 3th International Conference on Applied Research in Civil Engineering, Architecture & Urban Management, Tehran, Iran.
  7. H Eskandari, T Korouzhdeh. (2014). Cost Optimization Analysis of Composite Beam. 4th International Conference on Composites: Characterization, Fabrication, and Application (CCFA-4), Tehran, Iran.
  8. A Ziaei Nia, H Eskandari. (2014). A basic finite element model for study of freeze and thaw in concrete curb. Concrete national conference.
  9. H. Eskandari and A. Madadi. (2014). Design and Construction of Ferrocement Lightweight Concrete Structures. 6th Concrete National Conference, Tehran, Iran.
  10. H. Eskandari and A. Pakzad. (2014). Foundation Analyzing of Centrifugal ID Fan Cement Plants with FEM Method. 6th Concrete National Conference, Tehran, Iran.
  11. H. Eskandari and M. Azimi Pour. (2014). Design and prediction of ferrocement mortar compressive strength. 6th Concrete National Conference, Tehran, Iran.
  12. M Dezhangah, H Eskandari. (2014). Modeling cylindrical concrete columns reinforced with rebar and wrapping of glass fiber polymer (GFRP). 6th Concrete National Conference, Tehran, Iran.
  13. A Hejazian, H Eskandari. (2014). Design and repair of concrete structures with corrosion caused by chloride. 6th Concrete National Conference, Tehran, Iran.
  14. M. Nematinezhad, H. Eskandari (2014). Linear and nonlinear static and dynamic design of high concrete structures.  6th Concrete National Conference, Tehran, Iran.
  15. M Azimi Pour, H Eskandari. (2014). Optimization investigation and modeling of ferrocement mix design. Architecture, Civil Engineering and Urban Development Conference, Tabriz, Iran.
  16. H. Eskandari and A. Madadi, (2014). Ferrocement technology and its application in urban development. Architecture, Civil Engineering and Urban Development Conference, Tabriz, Iran.
  17. H. Eskandari and A. Pakzad, (2014). Optimization Methods in concrete mix design (Persian). Architecture, Civil Engineering and Urban Development Conference, Tabriz, Iran.
  18. H. Eskandari and A. Ziaei Nia, (2014). Application of dynamic optimization in safe design of tanks (Persian). Architecture, Civil Engineering and Urban Development Conference, Tabriz, Iran.
  19. H. Eskandari and M. Heydari, (2014). Application of concrete septic tank in reducing the damages of crises. Architecture, Civil Engineering and Urban Development Conference, Tabriz, Iran.
  20. H Eskandari, A Pakzad, A Amiri, R Sadati. (2014). Finite element analysis of ID fan foundation on various modulus of elasticity concrete. Cement Magazine (Persian)-ISSN 1735-4390 1 (200), 61.
  21. H. Eskandari, A. Davoodi, A. Ghanei. (2014). Effects of air entraining and micro silica on corrosion of reinforced concrete” The first International conference on sustainable urban structure, Tehran,Iran. profs.hsu.ac.ir/eskandari/files/2017/12/Ghanei-con.pdf
  22. H. Eskandari,  A. Pakzad. (2014). Mix Design Optimization of Self Consolidating Concrete Using Simplex Lattice. The first International conference on sustainable urban structure, Tehran, Iran.
  23. H. Eskandari,  A. Ziaei Nia. (2014). Dynamic optimization of HPC in concrete structures of passive defense. The first International conference on sustainable urban structure, Tehran, Iran.
  24. H. Eskandari,  E. S. Hosseini. (2014). Corrosion optimization in reinforced concrete. The first International conference on sustainable urban structure, Tehran, Iran.
  25. H. Eskandari,  S. Morshedi Torbati. (2014). Application and production of dry-presses concrete curbs. The first International conference on sustainable urban structure, Tehran, Iran.
  26. H. Eskandari,  A. Pakzad. (2014). Analyzing and Retrofitting Design of Corrosion Damages in Concrete Structure. 1st National Conference on Architecture, Civil engineering & Urban environment, Hamedan, Iran.
  27. H. Eskandari,  A. Pakzad. (2014). Compressive Strength Formulating of HPC. National Conference on Civil and Architecture engineering & Urban Sustainable Management, Gorgan, Iran.
  28. S Muralidhara, H Eskandari, BKR Prasad, RK Singh. (2011). b-value of plain concrete beams based on AE Quanta. Experimental Mechanics on Emerging Energy Systems and Materials, Volume 5, 81-93.
  29. HE Naddaf, (2010). Fracture Characteristics Of Self Consolidating Concrete, G22894.
  30. BVVR Hamid Eskandari, S. Muralidhara, B K Raghu Prasad, (2010), Relationship between GF and Gf for self consolidating concrete. Framcos 8, Korea.
  31. BLK S. Muralidhara, B. K. Raghu Prasad, Hamid Eskandari, (2009). True fracture energy and process zone of plain concrete from AE data, IMECE2009-13333, International Mechanical Engineering Congress, in Florida.USA.
  32. BVVR Hamid Eskandari, S. Muralidhara, B K Raghu Prasad. (2009). Nano-micro fracture using moment tensor based on AE, IMECE2009-13332, International Mechanical Engineering Congress, in Florida.USA.
  33. H Eskandari, RBK Prasad, S Muralidhara, VBV Reddy, (2009). AE Studies on Non-Micro Fracture using Moment Tensor in Solid Mechanics, IMECE2008-66306, International Mechanical Engineering Congress, October 31.
  34. S Muralidhara, H Eskandari, RBK Prasad. (2008). Utilising AE sensor Peak Energy to estimate fracture process zone size in plain concrete beams, Proceedings of IQCICF, IISc, Bangalore, India, pp 61-64.
  35. AR Khaloo, H Eskandari. (2004). Regulations for Use of Concrete in Oil Industry. 1st National Conference in Civil Eng., 7p.

Books:

حمید اسکندری، غلامرضا تدین فر، امیرحسین مددی. “ارزیابی اقتصادی در مهندسی و مدیریت پروژه” دانشگاه حکیم سبزواری، 1396

 حمید اسکندری، غلامرضا تدین فر، انیس قانعی. “تکنولوژی بتن پیشرفته: جلد اول-مواد تشکیل دهنده” دانشگاه حکیم سبزواری، 1396

حمید اسکندری، مرتضی طیبی نیا. “آزمایشگاه تکنولوژی بتن” دانشگاه حکیم سبزواری، 1396

حمید اسکندری، غلامرضا تدین فر،امیر پاکزاد. “ارزیابی بتن در سازه ها” دانشگاه حکیم سبزواری، 1396

حمید اسکندری. “اصول و مقررات پیمان” دانشگاه حکیم سبزواری، 1396

Books (under preparation):

  1. Robert Peurifoy, Clifford J. Schexnayder, Aviad Shapira, and Robert Schmitt, “Construction Planning, Equipment, and Methods 8th Edition”, Translated in Persian by H. Eskandari, A.A. Sadeghi and T. Korouzhdeh.
  2. Eskandari, and A. Madadi, “Advanced Concrete Technology”, In Persian.
  3. Eskandari, and H. Bakhshi, “Construction of concrete structures”, In Persian.
  4. Eskandari, “Contract Laws and Regulations”, In Persian.
  5. Eskandari, “Engineering-Economy-Sixth-Edition”, Translated in Persian.
  6. Eskandari, “Concrete Mix Design”, In Persian.
  7. Eur Ing Albert Lester, “Project Planning and Control 4th Edition”, Translated in Persian by H. Eskandari.
  8. John Newman, Ban Seng Choo, “Advanced Concrete Technology: Concrete Properties”, Translated in Persian by H. Eskandari, A. Ziaei Nia.
  9. John Newman, Ban Seng Choo, “Advanced Concrete Technology: Processes”, Translated in Persian by H. Eskandari.
  10. John Newman, Ban Seng Choo, “Advanced Concrete Technology: Testing and Quality”, Translated in Persian by H. Eskandari, M. Sadeghian.

Leave a Reply

Your email address will not be published.


*